Reformer Set Up Instructions / Videos

Our easy-to-follow videos are designed to make your experience smooth and enjoyable.

Dive in and discover how to set up and use your reformer!

Before you begin:

  • Use two people to lift the reformer
  • Follow proper manual handling techniques
  • Read the Safety & Setup Brief before assembling

1. Unboxing

  • Open shipping crate from the top
  • Carefully remove all contents from the box
  • Remove all protective wrapping

2. Lay Out All Parts

2.1 Make sure you have the following:

  • Pilates Reformer
  • Padded Standing Platform
  • Hand Straps & Foot Strap
  • Sitting Box
  • Jump Board
  • Pulley Ropes
  • Pulleys (on extender pole)
  • Shoulder Pads
  • Handle Mounts
  • Nuts, Bolts, Handled Screws & Quick Release Pins
  • Tools

3. Assembly Steps

3.1 Shoulder Pads

  • Slide the shoulder pads into the designated slots on the carriage.

3.2 Handle Mounts

  • Attach the handle mounts to the carriage just above the shoulder pad slots.
  • Use the threaded holes provided and tighten securely.

3.3 Pulleys

  • Insert the pulleys into the holes at the front of the reformer.
  • Secure them using the handled screws or quick-release pins provided.

3.4 Pulley Ropes

  • Hook the hand strap onto the handle mount
  • Thread the rope through the pulley
  • Feed the rope end into the rope lock to secure

3.5 Foot Strap

  • Clip the foot strap onto the eyelets located at the front vertical section of the reformer (near the springs).

3.6 Jump Board (Optional)

  • Lower the foot bar
  • Insert the jump board into the designated slot
  • Raise the foot bar until it touches and locks the jump board in place
  • Ensure it is secure and does not move

Instructional Videos

The Studio Reformer

The Foldable Reformer

Contact Us